This table indicates the number of clock periods for the single operand instructions. The number of bus read and write cycles is shown in parenthesis as (r/w). The number of clock periods and the number of read and write cycles must be added respectively to those of the effective address calculation where indicated.

Single Operand Instruction Execution Times

 Instruction  Size  Register  Memory
 CLR  byte,word  4 ( 1 / 0)  8 ( 1 / 1 ) +
       long  6 ( 1 / 0 )  12 ( 1 / 2) +
 NBCD       byte  6 ( 1 / 0 )  8 ( 1 / 1 ) +
 NEG  byte,word  4 ( 1 / 0 )  8 ( 1 / 1 ) +
       long  6 ( 1 / 0 )  12 ( 1 / 2) +
 NEGX  byte,word  4 ( 1 / 0 )  8 ( 1 / 1) +
       long  6 ( 1 / 0 )  12 ( 1 / 2) +
 NOT  byte,word  4 ( 1 / 0 )  8 ( 1 / 1 ) +
       long  6 ( 1 / 0 )  12 ( 1 / 2 ) +
 Scc  byte,false  4 ( 1 / 0 )  8 ( 1 / 1 ) +
   byte,true  6 ( 1 / 0 )  8 ( 1 / 1 ) +
 TAS #       byte  4 ( 1 / 0 )  10 ( 1 / 1 ) +
 TST  byte,word  4 ( 1 / 0 )  4 ( 1 / 0 ) +
       long  4 ( 1 / 0)  4 ( 1 / 0 ) +

                  + Add effective address calculation time
   # This instruction should never be used on the Amiga as its invisiable read/write cycle can disrupt system DMA.
© 2024 iKod.se